The Anode and Cathode Materials Have Arrived.

This post was written by Jim on May 14, 2008
Posted Under: Better Gas Mileage For Our Gas Guzzler,gas additives,Water Hybrids

Both sets of wire have arrived and I will begin shortly to cut out the heavy plastic sheets to make the supports for the wire. Stay with me on this. I need to spend about 2 hours in my shop to get everything prepared and while I work on that, remember that you can use the formulas In my recent post to begin to achieve your better gas miles per expensive gallon. Just follow the formulas and make sure that you add them to about ten gallons or liters of gas. Too much Acetone, Xylene and GP-7 isn't such a good idea as I have found out. The truck really backfired on more of the mixture than I had originally used so I am back to the smaller more sure formula. 2 ounces of Acetone, Xylene and 10 drops of GP-7 for every ten gallons or liters in case you are in another country other than the US.

I will be also adding a discussion about the differences in Smacksbooster and Water4Gas booster in the very near future. All the best to you. Thanks for reading and I hope you swill soon embark on your quest for better gas mileage. Jim

Comments are closed.