Here are some tips to save gasoline. First tip, please make sure that you have tuned your car to its working efficiency. To explain further, make sure that spark plugs have been changed ( if you have high miles on the car) and are working properly. Along with that make sure that all filters have been replaced specially the air filter is free of dirt and essentially unclogged. Make sure that routine service for the number of miles on your odometer has been completed. This is probably one of the most important and critical tips that you can do to save gasoline and maximize your miles per gallon.
Tip two Have the all important correct inflation pressures on your tires checked and any deficiencies have been corrected. This is probably a good time to rotate and balance your tires for even wear and visually check for any abnormalities such as excessive wear on the sides ( whether toeing in or out correct this problem before it gets critical) and look for other wear spotos that might become a problem in the not so distant future. I usually do a quick visual check every time before getting it the car or truck. There is nothing like a flat tire from a nail that you didn’t see before getting in your car to ruin your day.
These are just some of the tips that you should use to keep your car or truck in good operating condition. Adding a Hydrogen Generator, EFIE and MAP sensor enhancer to your working equipment would also help to maximize your miles per gallon. But then you already know that. Right?
Thanks for stopping by and reading my posts. There are a lot of good information here. Check out the article categories. Keep in touch. And if you want the free ebook that will give you a good background in the Water/Gas Field drop me an email at jimclay1153@gmail.com and I will send it to you. All the best, Jim
0 responses so far ↓
There are no comments yet...Kick things off by filling out the form below.
Leave a Comment