Water Based Hybrid Systems & Hydrogen Generators At Tapwaterforgas.com

I am re-running this Post on hydrogen generators again because I am afraid that you might have missed some of this information. Posting on a blog I have found that a really good article doesn’t last long until another one is put in its place. The more articles posted to the blog, the more difficult it is to really zero in on the really good ones about hydrogen generators that are filled with the information that you need to build a generator safely. So I have decided to rerun this first article in the series on building the Water4Gas simplified and easy to build generator. I have also added what is called a widget to the right side of the blog listing several good and timely articles on hydrogen generators and touching on both water4gas types and smack types.

This first video in the series deals with making the Plexiglas framework that you will hang the double twined 316L wire on and fastened both at the top for the terminal cap and the bottom on the framework itself. If you don’t understand much of that, just watch the video and you will see what I am talking about Remember too, that the 316L stainless steel wire should be at least doubled at the beginning if not tripled and then braided. He uses an electric drill which is common in the states but might not be all that common where you live. Just remember to braid the wire for greater surface for the hydrogen atoms to attached themselves to while the electrolysis is going on.

When you feel that you are ready to build, if you can, you should purchase plans from one of the companies on the web. The reason that I say to purchase the manuals is that none of these videos show you all the details in building that are clearly described in the manuals. There is just so much information that is helpful to you beside the pictures of the building process. For example, the first manual in this series deals with many gas saving tips. So many that you will not remember all of them, but some you should definitely put into use with each tank of gas you purchase. Just one more way to extend miles and save gas and money.

I use Water4gas and and some of the reasons that I do besides what I have said previously is that they have a great deal of information on their homepage and specially in their forum which can’t be found anywhere else. The forum is a priceless resource and any time you spend there is adding much hard to find data to your knowledge. There you can find all the information about building the generators, about installing them, trouble-shooting the system and best of all, a lot of people who can answer your questions without making you feel dumb for asking. Well I think that I have talked enough. Here is the video. Let me know what you thought about it. Make a comment if you wish. I will be glad to answer you. Remember, no question is dumb, only those questions never asked are the dumb ones.

HHO Electrolyzer Core Assembly Water4gas 1 of 3 - Click here for this week’s top video clips

You should go ahead and watch the other two on my website and finish up the series. That should give you a rough idea of what you will need to complete a finished generator. Keep in touch. Thanks for stopping by and reading and looking at the videos. I have a free basic ebook on the water based hybrids that I will send you. Jusr email me at jimclay1153@gmail.com and I will send it to you. All the best, Jim.