A Simple Hydrogen Booster, Smacksbooster

This video is a different type of generator using plates instead of twisted 316L wires. It is still the same thing, a Hydrogen Generator. Most Smack Boosters average out to 3 or better Liters per minute of hydrogen gas I am not sure how many liters per minute of gas are produced by this one. The difference between a regular Smacks is in the number of 316L stainless steel plates and how they are prepared before assembly. The original ones have up to 256 dimpled areas on each plate and the amount of space between the plates was measured precisely.

Another difference was in the amount of amperage running across the terminals. I believe Smacks run a pretty high amperage but at this point I don’t remember the amps used. I do know that Smack himself ( not his real name) uses KOH rather than soda bicarbonate.  Interestingly that the experimenter does not talk about keeping his gains by using an EFIE. By now you should be aware that locking in gains by tweaking the voltage coming from the upstream oxygen sensor is one way ( actually the most important way) to keep whatever gains are produced by the generator. There are other sensor enhancements like IAT sensor, MAP and MAF sensor enhancers as well but the one sensor whose data is key to leaning out the engine is the upstream oxygen sensor.

An interesting thing is that the experimenter does not talk about keeping his gains by using an EFIE.
This is a close copy of the smacksbooster just not as complete as smacks. The plates can be dimpled with a hammer to add more nesting places for the hydrogen gas atoms to adhere to them. An alternative to the simpler and easier Water4Gas design.  I am more familiar with the Water4gas system.

The important facts  with the Water4gas system you receive complete information on building the generator, how to construct the wiring and where to add the wires to your car and also wiring schematics for the EFIE and other sensor enhancers. And it is just not the sensor enhancer wiring information that you get but also the plans for the fuel heater and PVC drain and just a host of other additions and enhancements to your system. The Manuals are very detailed with step by step instructions so that you cannot go wrong.   Here is the modified Smacksbooster type of hydrogen generator.

As always if you would like a free ebook that gives you a very good background on the Water-Based Hybrid Field just email me at  jimclay1153@gmail.com and I will send one to you . Thanks for stopping by and reading the Posts. Keep in touch and all the best, Jim