Dry Cell Construction

This post was written by Jim on January 4, 2012
Posted Under: Building The Hydrogen Boioster,water for gas,Water Hybrids

I have a video from You tube showing construction of a Dry Cell . Also I have a set of Dry Cell Plans, very early ones, with a great deal of how to align plates, how to add spacers, etc.  A word of caution here, the free plans show Dry Cell internal plates composed of 304 Stainless Steel. To save yourself endless problems, switch over to better grade of stainless, 316L that can perform better and what is more important, produce gas for a  longer time then 304. You can get Stainless Steel Plates of 316L Grade from Lowes,  they are actually electrical cover plates and are relatively inexpensive. Also make sure that you always use a bubbler and a special non-return valve to prevent bubbler water returning into the Dry Cell in case of a backfire.  Oh yes, you must take steps to protect yourself and equipment from the very volatile Hydroxy Gas. This gas  will do a wonderful job in your engine producing  cleaner emissions, better gas mileage and  more pep but the gas is volatile and will explode around an open flame so be careful.  Take a look at the video and them email me at jimclay1153@gmail.com and I will send you the free plans.    Sincerely, Jim

 

Comments are closed.

Previose Post: