Building the Charged Water System from Watr4Gas is a relatively easy task. There is not much in the way of materials and expertise that you need. Probably the easiest part is to purchase the Manuals from Water4Gas. Com. To try and do this on the cheap so to speak just will not get you very [...]
You can not hardly go wrong with a Water4gas Charged Water System. I know because I built one that was raggedly and ill built but it works and over time I was able to generate enough Hydrogen Gas to give my Mazda Truck an extra 3 and sometimes 4 MPG over the rated 16 MPG [...]
 |  |  |  |  |  |  |  |  |
 |  |  |  |  |  |  |  |  |
 |  |  |  |  | ||||
The oxygen sensor "tells" the computer what the oxygen content is by providing a voltage on it's signal wire between 0 and 1 volt. 450 millivolts (.45 volts) means that the fuel/air mixture is correct. Higher values means the mix is rich (has too much gas), and lower voltages means the mix is lean. By adding voltage to the sensor's output, we can compensate for the additional oxygen in the exhaust.