This was an email to a gentleman in response to some questions from his children. I thought that I would re-print it here for what its worth. As to whether the stuff ( Hydrogen Generation) works – yes but a qualified yes. If you expect 50 % mileage gains right off the bat, you probably [...]
Hello again, just thought that I would add a word about gas additives. Many are the claims that they ” don’t work and are a waste of time and money,” whereas, others say that how you use them is the key to getting better miles per gallon. Well I can only tell you how it [...]
You should place a great deal of thought as to whether to build or buy ready made a Hydrogen Generator. Sometimes, I have noticed, Hydrogen Generators are offered for sale by folks who don’t have a lot of experience in setting one up under the hood. Any mistakes made in that area could have some [...]
As if the one email from Pastor Jose wasn’t enough to talk us into buying the Manuals of the Water4Gas System, here is an update from the good Pastor in his own words. If this doesn’t sell you on the worth of a Water4Gas system, I don’t know what will. Just so that you know, [...]
Good Morning All. I wanted to share with you an email that I received from a Pastor in the Philippines this morning. I will do some cutting and pasting into this Post, using the Pastor’s own words. If nothing else this should tell you just how wide spread the interest is in Alternative fuels and [...]
I have made some changes in the terminals for my Electrolyzer. I found that trying to work with the Plexiglas sheets of 1/8th inch thickness was very difficult. I had recently received an email from a person who read several of my Posts. He wanted a copy of my free ebook and also mentioned in [...]
The truth is that pure water as wonderful as it is and as necessary to our bodies as it is does not run our car by itself at least not with the technology present today. Oh I have seen cars being run with water on Youtube but I think that the cars engine has been [...]
I wanted to make sure that I added this Post before the weekend. I have been busy with my Electrolysis Unit , trying to get the windings of the NiTi wire the way I think it should be. I am using NiTi wire instead of 316L stainless steel wire because I think that the NiTi [...]
Sorry for the delay, our holiday of July 4th happens to be the same time that we have a big family reunion at my wife’s farm where she grew up. We had several family members here including a very active 5 year old so nothing got done including having time to write. Sorry for that. [...]
I thought that I would talk about some websites that I have visited in the past that sell manuals to build hydrogen generators. I am not going to rank them in any fashion but will just talk about each that I have visited and let you make up your own mind which is the better [...]
 |  |  |  |  |  |  |  |  |
 |  |  |  |  |  |  |  |  |
 |  |  |  |  | ||||
The oxygen sensor "tells" the computer what the oxygen content is by providing a voltage on it's signal wire between 0 and 1 volt. 450 millivolts (.45 volts) means that the fuel/air mixture is correct. Higher values means the mix is rich (has too much gas), and lower voltages means the mix is lean. By adding voltage to the sensor's output, we can compensate for the additional oxygen in the exhaust.